<delect id="jbzvv"><address id="jbzvv"></address></delect>
<em id="jbzvv"><ins id="jbzvv"></ins></em><sup id="jbzvv"></sup>
    <sup id="jbzvv"></sup>

      <em id="jbzvv"><ins id="jbzvv"><thead id="jbzvv"></thead></ins></em>
      <sup id="jbzvv"></sup>
          <em id="jbzvv"><ins id="jbzvv"></ins></em>
          <sup id="jbzvv"></sup>

          <em id="jbzvv"><ins id="jbzvv"><thead id="jbzvv"></thead></ins></em>
            ?
            咨詢熱線: 0513-88400999
            ?
            輸送設備

            立磨

            周先生 13906278080 丁寶勤 13906276368

            電話:0513-88400999 傳真:0513-88400998 郵箱:[email protected]

             立磨
             


            一、總論
                立磨屬于輥式磨的一種,按照要求可以配置2, 3或者4個磨輥。每一個磨輥,它都是由固定的搖臂、安裝搖臂的支架,以及液壓系統組成了粉磨的動力單元。此動力單元為整體式或者一個標準組件,它可在磨盤周圍布置成二組分、三組分或者四組分。

            I. Overview
                SH vertical mill is one of the roll mills. It can be equipped with 2, 3 or 4 grinding rolls. Each grinding roller is composed of fixed rock arms, frame and hydraulic pressure system, which is the drive unit. This drive unit is an integral or standard part. It can be mounted around the grinder to be two-component, three-component or four-component.


            二、工作原理
                原料通過自動進料裝置進入到下料管,下料管是透過分離器的側面或中間進入到磨機內部的。物料借助于重力和氣流的沖擊作用而落到磨盤中央。磨盤牢固的與減速機相連,以恒速旋轉。磨盤的恒速旋轉將粉磨物料均勻的水平分布在磨盤的襯板上,液壓系統的強大壓力通過搖臂傳遞到磨輥,并由自動控制系統保證磨輥能保持恒定壓力,斜錐式的磨輥結構能夠咬住物料,在與磨盤相對運動的過程中 將物料碾碎,并在碾壓與磨擦運動的共同作用下將物料碼成粉末。在離心力的作用下,被磨碎的粉料 向磨盤邊緣甩出,與進入磨機的高速熱氣流混合并進行充分的熱交換,水份被迅速蒸發,跟隨熱氣流 上升的粉料水份已不超過1%,不斷進入磨機中部的物料也在離心力的作用下不斷向磨輥的碾壓軌跡區 運動填補被甩出物料的空間,行成物料順序流動。被高速氣流帶動上升的粉料進入分離器進行分選,分選出的合格粉料被送入收塵器回收入庫,不合格的粉料被分離器轉子葉片甩出與外靜葉片碰撞,使其動能衰減,落回磨盤中進行再粉磨。形成了粉磨過程的動態循環作業。

            II. Working principle
                The raw material goes into the tremie pipe through the automatic feeder. The tremie pipe extends into the inside of the mill through the concentrator’ s side or center. The material drops on the center of the grinder with the help of the force of gravity and the gas impact. The grinder is firmly connected to the speed reducer, spinning at a constant speed. The grinder’ s constant speed spinning scatters the material evenly on the plate of the grinder. The strong pressure of the hydraulic pressure system is transmitted to the grinding roll through the rock arms. The automatic control system ensures the constant pressure of the roller. The bevel roller structure helps to seize materials and crushes the materials in the relative motion to the grinder. The material is ground into powder with the forces of roll and friction. By means of centrifugal force, the ground powder is drawn out to the edge of the grinder. Then the material is mixed with the high speed hot air current and has fully heat exchange so that the water is instantly evaporated. The water in the powder rising with the hot air stream is not more than 1%. The material constantly fed into the mill moves to the rolling track of the grinding roll by the force of centrifugal force in order to replace the drawn out material. Thus, the material can flow in order. The powder rising with the high speed air stream goes into the concentrator, and the qualified powder is centrifuged into the dust collector, the unqualified is ejected out by the rotor blades to collide with the outer still blades and drops into the grinder to get ground again. Then the grinding is repeated.
             


            三、特點
            ◎噪音低 ◎單位能耗低 ◎控制反應迅速
            ◎從啟動到停機,振動很小 ◎適應性強
            ◎占地面積小 ◎調節簡便 ◎干法粉磨能力極佳
            ◎維修方便(不必拆除磨機便可更換磨損件) ◎可對各種不同物料進行粉磨
            III. Characteristics
            ◎Low noise ©Low unit energy consumption ◎ Quick control reaction ◎Tiny vibration from start to stop ©Good adaptability
            ◎Small body,Convenient adjustment ◎ Excellent dry grinding
            ©Convenient maintenance (part replacing without dismantling) ©All different kinds of materials to be ground


            SHMS礦渣立磨標準參數表
            SHMS Slag Vertical Mill Standard Parameters

             

            磨機主要參數及能力Main Parameters and Capacities

            磨機型號Model

            磨盤直徑

            Grinder Diameter (mm)

            磨盤軌道直徑

            Grinder Track Diameter d(mm)

            磨輥平均直徑

            Roll Average Diameter(mm)

            磨輥數

            Roll Number

            磨盤轉數

            Rotation Number(rpm)

            廣能力

            Capacity

            (t/h)

            ^機功率Power (kW)

            SHMS50.41

            5000

            4266

            2360

            4(2+2)

            25.9

            120

            3500

            SHMS46.41

            4600

            3908

            2240

            4(2+2)

            27.0

            100

            3150

            SHMS43.41

            4300

            3608

            2120

            4(2+2)

            27.9

            85

            2800

            SHMS40.41

            4000

            3411

            1900

            4(2+2)

            29.0

            75

            2000

            SHMS35.41

            3500

            2932

            1800

            4(2+2)

            30.9

            60

            1800

            SHMS34.41

            3400

            2868

            1700

            4(2+2)

            31.4

            50

            1600

            SHMS32.41

            3200

            2694

            1600

            4(2+2)

            32.4

            45

            1600

            SHMS30.41

            3000

            2520

            1500

            4(2+2)

            33.4

            40

            1250

            SHMS28.41

            2800

            2346

            1400

            4(2+2)

            34.6

            35

            1000

            備注:
            磨機能力評價基準:
            (1)原料中等易磨性(MFs) = 0.9?1.0;
            (2)原料水分15%;
            (3)精粉粒度:4200 -4500cm2/g ;
            (4)精分水分0.5~1.0%。
            Note:
            Mill capacity standard
            (1) Medium grindability of raw material
            (2) Material water content 15%
            (3) Powder granularity
            (4) Powder water content

            SHCM標準煙煤立磨技術參數(無煙煤立磨單Du討論)

            磨機主要參數及能力Main Parameters and Capacities

            磨機型號Model

            磨盤直徑Grinder Diameter (mm)

            磨輥平均直徑

            Roll Average Diameter(mm)

            磨輥數

            Roll Number

            磨盤轉數

            Rotation Number(rpm)

            標準能力

            Standard CapacityQ(t/hf

            裝機功率Power (kW)

            SHCM35.30

            3500

            1900

            3

            30.9

            70

            1400

            SHCM30.30

            3000

            1900

            3

            33.4

            65

            1250

            SHCM28.30

            2800

            1750

            3

            34.6

            55

            1000

            SHCM26.30

            2600

            1600

            3

            35.9

            45

            810

            SHCM23.30

            2300

            1450

            3

            38.2

            35

            640

            SHCM22.30

            2200

            1400

            3

            39

            30

            590

            SHCM20.30

            2000

            1250

            3

            40.9

            20

            430

            SHCM16.30

            1600

            1000

            3

            45.8

            12

            250

             

             備注:
            磨機能力評價基準:
            (1)  原料中等易磨性HGI= 55-60;
            (2)  原料水分10%;
            (3)  精粉粒度:80mmR3%;
            (4)  精分水分0.5~1.0%。

            Note:
            Mill capacity standard
            (1)  Medium grindability of raw material
            (2)  Material water content 10%
            (3)  Powder granularity
            (4)  Powder water content

            SHRM生料立磨技術參數表
            SHRM Raw Material Vertical Mill Technical Parameters
             

            磨機主要參數及能力Main Parameters and Capacities

            磨機型號Model

            磨盤直徑Grinder

            辱襌平埤.直徑

            Roll Average Diameter(mm)

            磨輯數

            Roll Number

            磨盤轉數

            Rotation Number(rpm)

            裝機功率Power (kW)

            標準能力

            Standard CapacityQ(t/h)

            保證能力

            Guaranteed Capacity

            Q(t/h)

            配備水泥Cement

            SHRM13.20

            1300

            1100

            2

            43

            200

            25

            20

             

            SHRM16.20

            1600

            1180

            2

            45.77

            200

            26.4

            22

             

            SHRM18.30

            1800

            1120

            3

            43.16

            330

            43.9

            37

             

            SHRM19.30

            1900

            1180

            3

            42.01

            380

            50.4

            43

             

            SHRM20.30

            2000

            1250

            3

            40.94

            430

            57.8

            49

             

            SHRM22.30

            2200

            1400

            3

            39.04

            580

            77

            65

             

            SHRM23.30

            2300

            1450

            3

            38.18

            630

            83.5

            71

             

            SHRM26.30

            2600

            1600

            3

            35.91

            810

            108.1

            92

             

            SHRM30.30

            3000

            1700

            3

            33.43

            950

            126.9

            108

             

            SHRM30.40

            3000

            1400

            4

            33.43

            1100

            160.8

            137

            -2000

            SHRM32.40

            3200

            1400

            4

            32.37

            1200

            168.7

            143

             

            SHRM32.40

            3200

            1500

            4

            32.37

            1300

            188.7

            160

             

            SHRM34.40

            3400

            1500

            4

            31.4

            1400

            197.3

            168

            2000

            SHRM36.42

            3600

            1700

            4

            30.52

            1600

            231.7

            197

            2500、3000

            SHRM38.42

            3800

            1700

            4

            29.7

            1900

            266

            226

             

            SHRM40.42

            4000

            1800

            4

            28.95

            2100

            307

            261

            3500、4000

            SHRM43.42

            4300

            1900

            4

            27.92

            2500

            357.4

            304

             

            SHRM46.42

            4600

            2060

            4

            27

            3100

            436.2

            371

            4500

            SHRM48.41

            4800

            1900

            4

            26.43

            2700

            386.5

            329

             

            SHRM48.42

            4800

            2060

            4

            26.43

            3100

            449.8

            382

            4500、5000

            SHRM50.41

            5000

            2240

            4

            25.89

            3600

            516.3

            439

             

            SHRM53.41

            5300

            2360

            4

            25.15

            4200

            595.6

            506

            -6000

            SHRM53.42

            5300

            2500

            4

            25.15

            4400

            630.6

            536

            6000 ~ 7000

            SHRM56.42

            5600

            2500

            4

            24.47

            4600

            655.7

            557

             

            備注:
            磨機選型基準:
            (1) 料中等易磨性(MF) = 0.9?1.0;
            (2) (2)原料水分7%;
            (3) 精粉粒度80 m mR 12-15 %;
            (4) 精粉水分0.5 ~ 1.0 % ;
            (5) 以上條件同樣適合石灰石粉磨,具體選型根據物料特性而定。
            Note:
            Mill capacity standard
            (1) Medium grindability of raw material
            (2) Material water content 15%
            (3) Powder granularity
            (4) Powder water content
            (5) The above conditions are also suitable for limestone mill. The model depends on the material.

             

            下一頁:回轉窯
            產品關鍵詞:立磨 立式磨 粉磨設備
            相關產品
            猜您感興趣的
            ?
            Copyright ? 2006-2019 江蘇中礦重型裝備有限公司 版權所有 蘇ICP備13032710號-1

            蘇公網安備 32062102000318號

            女仆窝最新域名