<delect id="jbzvv"><address id="jbzvv"></address></delect>
<em id="jbzvv"><ins id="jbzvv"></ins></em><sup id="jbzvv"></sup>
    <sup id="jbzvv"></sup>

      <em id="jbzvv"><ins id="jbzvv"><thead id="jbzvv"></thead></ins></em>
      <sup id="jbzvv"></sup>
          <em id="jbzvv"><ins id="jbzvv"></ins></em>
          <sup id="jbzvv"></sup>

          <em id="jbzvv"><ins id="jbzvv"><thead id="jbzvv"></thead></ins></em>
            ?
            咨詢熱線: 0513-88400999
            ?
            輸送設備

            GX螺旋輸送機

            周先生 13906278080 丁寶勤 13906276368

            電話:0513-88400999 傳真:0513-88400998 郵箱:[email protected]

             

             

             
            一、概述
                    GX型螺旋輸送機是利用螺旋轉動將物料沿機殼連續推移而進行輸送的。本機具有結構簡單, 外形尺寸小,成本低,操作安全,能按工藝要求滿足多點進料和排料。
            .Brief introduction
                    Type GX Screw Conveyor is conveyed material by screw rotation along shell. It is characterized by simple structure, small outline size, low cost and safe operation. Inlet and outlet at many points according to workmanship request.


            二、技術性能與技術參數
            Technical capacity and technical parameter

            規格{Specification}

            主要技術性能(Main technical capactity)

            驅動裝置(Driving device)

            重量

            (Weight)

            (kg)

            直徑

            (Diameter)

            長度

            (Length)

            (m)

            產量(水泥} (噸/時)Output (cement) t/h

            轉速

            (轉/分)Speed (r/min)

            減速機(Reducer)

            電動機{Motor}

            型號(Type)

            速比(Ratio)

            型號(Type)

            功率(kw) (Power)

            QX200

            ?10

            9

            60

            JZQ250

            23. 34

            Y90S—4

            1. 1

            726

            GX200

            ?20

            9

            60

            JZQ250

            23. 34

            Y90L—4

            1.5

            1258

            GX250

            ?10

            15.6

            60

            JZQ250

            23. 34

            Y100L—4

            2. 2

            960

            Gx250

            ?20

            15.6

            60

            JZQ250

            23. 34

            Y100L—4

            3

            1750

            GX300

            ?10

            21.2

            60

            JZQ350

            23. 34

            Y100L—4

            3

            1373

            QX300

            ?20

            21.2

            60

            JZQ350

            23. 34

            Y112M—4

            4

            2346

            GX400

            ?10

            51

            60

            JZ0400

            23. 34

            Y132S—4

            5. 5

            1911

            GX400

            ?20

            51

            60

            JZQ500

            23. 34

            Y160M—4

            11

            2049

            Gx500

            ?10

            87.5

            60

            JZQ400

            23. 34

            Y132W—4

            7. 5

            2381

            GX500

            ?20

            87.5

            60

            JZQ650

            23. 34

            Y180W—4

            18. 5

            5389

            Qx600

            ?10

            134.2

            45

            JZQ750

            23. 34

            Y180L—4

            22

            3880

            Gx600

            ?10

            134.2

            45

            JZQ850

            23. 34

            Y250M—4

            55

            7090


            三、GX型螺旋輸送機的制法和裝法說明
            GX螺旋機按使用場合要求的不同,分為S制法和D制法兩種。
            S制法一帶有實體螺旋面的螺旋,其螺距等于直徑的0. 8倍。
            D制法一帶有帶式螺旋面的螺旋,其螺距等于直徑。
            GX螺旋機按驅動裝置裝配方法的不同,分為右裝和左裝兩種:
            右裝一站在電動機尾部向前看,減速器低速軸在電動機的右側。
            左裝一站在電動機尾部向前看,減速器低速軸在電動機的左側。
            GX螺旋機的出料口有方形出料口、手推式出料口和齒條式出料口三種。后兩種出料口拉板的 開閉方向,隨安裝不同而分右裝、左裝兩種:
            右裝一站在螺旋機頭節往尾節看,拉板向右拉開。
            左裝一站在螺旋機頭節往尾節看,拉板向左拉開。
            Fabrication and installation of type GX Screw Conveyor
            Type GX Screw Conveyor has S and D types according to applied condition.
            Type S~with screw of hypostatic screw surface, the pitch is equal to 0.8 times of diameter.
            Type D~With screw of screw surface, the pitch is equal to diameter.
            Type GX screw conveyor has right and left assemble way according to different assembling way.
            Right assemble-Stand in the tail of motor and look forward, low speed shaft of reducer is on the right of motor.
            Left assemble-Stand in the tail of motor and look forward, low speed shaft of reducer is on the left of motor. Outlet mouth of type GX screw conveyor has square outlet, hand drawing outlet and gear outlet. The direc-tion of rear two outlet plates has right and left assembling.
            Right assemble—Stand on head part of screw conveyor and look tail part, drawing plate is to the right.
            Left assemble—Stand on tail part of screw conveyor, drawing plate is to the left.


             

            上一頁:回轉窯
            下一頁:移動皮帶機
            產品關鍵詞:螺旋輸送機 輸送機
            相關產品
            猜您感興趣的
            ?
            Copyright ? 2006-2019 江蘇中礦重型裝備有限公司 版權所有 蘇ICP備13032710號-1

            蘇公網安備 32062102000318號

            女仆窝最新域名