<delect id="jbzvv"><address id="jbzvv"></address></delect>
<em id="jbzvv"><ins id="jbzvv"></ins></em><sup id="jbzvv"></sup>
    <sup id="jbzvv"></sup>

      <em id="jbzvv"><ins id="jbzvv"><thead id="jbzvv"></thead></ins></em>
      <sup id="jbzvv"></sup>
          <em id="jbzvv"><ins id="jbzvv"></ins></em>
          <sup id="jbzvv"></sup>

          <em id="jbzvv"><ins id="jbzvv"><thead id="jbzvv"></thead></ins></em>
            ?
            咨詢熱線: 0513-88400999
            ?
            粉體閥門

            BZ-Ⅰ/Ⅱ棒條閘門

            丁寶勤 13906276368(技術) 周龍泰 13606279370(商務)

            電話:0513-88400999 傳真:0513-88400998 郵箱:[email protected]

             


                    棒條閘門是根據建材、礦山、冶金等行業中對中、小固體塊狀物料的給料、輸送、控制等工藝的要求而研制的一種新型閥門,適用于≤50mm物料的輸送控制。

             

                    Rod valve is used to feed, convey and control middle, small liquid powder material of workmanship require¬ment according to building material, ore and metallurgical etc. industry which is a new valve. It is suitable to control and convey less than 50mm material. 


            結構特點:
                    采用優質型鋼材焊接,結構簡單、易操作、無卡阻、剛性強、不變形、使用壽命長、基本無維修量。是中、小固體塊狀物料控制的理想設備。
            Structure features
                    It is welded with excellent carbon steel. It is characterized by simple structure, easy operation, no blockage, strong rigidity, shapeless, long life and less maintenance etc. It is an ideal equipment to control middle and small powder material.

             


            性能參數(Capacity parameter)

            適用介質

            適用溫度

            Φ50mm以下的顆粒物料

            ≤300℃


            工作原理:
                    棒條閘門一般為常開型,物料處流通狀態。根據工況需要切斷或調節時,需逐個插入棒條,以阻止物料流通,也可根據工況需要通過調整棒條間的間隙來控制物料的大小。


            使用說明:
            •  安裝時兩法蘭間必須加密封墊片,然后均勻鎖緊連接螺栓。
            •  運行時不得對抽出的棒條進行猛烈撞擊,以免棒條變形無法復位。
            •  切斷流通塊料時,必須從兩邊依次插入棒條。
            •  若長期存放,不允許露天存放或堆置。


            Work principle
                    Rod valve is usual op.en and material is in flow condition. Insert rod according to work condition when cutting off or adjustment. Stop material flow it. Adjust the clearance between rod quantity to control material.
            Operation description:
            •Add sealing gaskets between two flanges when installation. Then tight the bolt even.
            When driving, not allow to impact the rod violently. In case that rod has no way to restore because of shapeless.
            When cutting off flowing material, insert rod from two ends.
            If it is stored for a long time, not allow to store in open air or pile.
             

             


            BZ-Ⅰ外形圖:                                           BZ-Ⅱ外形圖:

             


            BZ-Ⅰ/Ⅱ外形連接尺寸:

            規格

            A×A1

            B×B1

            C×C1

            L

            H

            H1

            n-Φ

            300×300

            390×390

            350×350

            300×300

            800

            120

            140

            8-Φ14

            400×400

            490×490

            450×450

            400×400

            1000

            120

            140

            12-Φ14

            500×500

            610×610

            560×560

            500×500

            1200

            140

            160

            16-Φ18

            600×600

            710×710

            660×660

            600×600

            1400

            140

            160

            16-Φ18

            700×700

            820×820

            770×770

            700×700

            1600

            160

            180

            20-Φ18

            800×800

            920×920

            870×870

            800×800

            1800

            160

            180

            20-Φ18

            900×900

            1030×1030

            972×972

            900×900

            2000

            160

            180

            24-Φ123

            1000×1000

            1130×1130

            1068×1068

            1000×1000

            2200

            160

            180

            24-Φ123

            1100×1100

            1240×1240

            1183×1183

            1100×1100

            2500

            180

            200

            28-Φ123

            1200×1200

            1340×1340

            1280×1280

            1200×1200

            2700

            180

            200

            32-Φ123

            相關產品
            猜您感興趣的
            ?
            Copyright ? 2006-2019 江蘇中礦重型裝備有限公司 版權所有 蘇ICP備13032710號-1

            蘇公網安備 32062102000318號

            女仆窝最新域名